A Seat at the Table: Chair 2

‘ISO 45’ is a laser-cut and folded sheet-metal stool with a powder-coated finish. Starting as a flat aluminium net, the path of the laser and the placement of the cuts are systematically determined by the sizing of regular timber sections. Working within the limits of these specifications, a new hybrid material typology is formed. The stool joins the ‘ISO Series’, an ongoing investigation into archetypal timber structures. This chair’s silhouette was inspired by a German agricultural fence. 

Pressed Clock

When held in a pressurised environment, softwoods like pine can be pressed in aluminium moulds and formed into denser, stronger objects. Balsa wood is known for its malleability, eliminating the need for specialised equipment. Instead, I discovered I could emboss shapes into the surface by steaming the balsa and clamping it in 3D printed moulds in my kitchen. The clock uses this technique; a 3D printed plate with 12 circles is pressed into the steamed balsa surface. The sheet is then mounted onto a second balsa board, which houses the wall-mounted clock mechanism.

Type Stool

The Type Stool is made using standard timber sections and drywall screws. These are readily available in hardware stores, which are my local resource for materials. They are easy to transport via public transport to my inner-city studio or a home workshop. For these designs, all of the cuts are made at 90°, simplifying the preparation of all the uniform parts. All clearance and countersunk holes for the screw joints can be pre-drilled with a hand-held drill, for ease of assembly. The screw placement has been considered for construction purposes, but also visual impact, demonstrating how affordable, off-the-shelf hardware and timber can produce desirable outcomes.